Electrochemical determination of anaerobic microbial decay coefficients

The biokinetics of attached and suspended bacteria are an essential component of activated sludge models, anaerobic digestion models and biofilm models. These parameters are often assumed or “confirmed” based on the goodness-of-fit of the bioprocess models. Using a microbial fuel cell with a baffled reactor chamber, the attached- and mixed-growth microbial decay coefficients were evaluated under anaerobic conditions. The capability for real-time voltage recording allows easy and accurate measurement of the anaerobic microbial decay coefficients (b_L, lysis-regrowth approach), which were determined to be 0.11 ± 0.01 and 0.15 ± 0.01 d⁻¹ for attached (to anode) and mixed (present in the anode chamber) growth microorganisms, respectively. The corresponding half-saturation constants using glucose as a substrate were 204 ± 10 and 123 ± 1 mg COD l⁻¹. Hence, like an oxygen uptake rate-based approach to measure the microbial kinetics under aerobic conditions, the electrochemical recording provides an attractive method to measure anaerobic microbial decay coefficients.     

GEOHYDROLOGY AND HYDROCHEMISTRY OF THE DAKOTA AQUIFER,CENTRAL UNITED STATES1

ABSTRACT: The Dakota aquifer, composed of the Dakota Sandstone and stratigraphically equivalent sandstone units of Cretaceous age, is the upper-most regional aquifer underlying the extensively developed High Plains aquifer of the midwestern United States. The concentration of dissolved solids in ground water of the Dakota aquifer ranges from less than 500 milligrams per liter in calcium bicarbonate type water in the eastern outcrop area to more than 100,000 milligrams per liter in sodium chloride type oilfield brine in the Denver Basin to the west. Preliminary maps showing the distribution of dissolved solids confirm the complex nature of the Dakota aquifer as inferred from stratigraphic and hydraulic evidence. Extensive vertical leakage through confining layers, local recharge at the truncated eastern boundary, and a barrier to recharge along the western edge of the Denver Basin are consistent with the distribution of hydraulic head and dissolved solids.     

ELECTROPHORETIC WATER CLARIFICATION TECHNIQUES1

Only very recently has a limited amount of attention been focused directly on electrophoresis as a method for improving water quality. This approach has been proposed primarily as a method for removal of suspended colloidal material, although solutes can also be removed by this method. Very simply electrophoresis is defined as the movement of charged suspended particles in a dc electric field. Several electrophoretic clarification systems and techniques have been developed and evaluated primarily for removing colloidal clay from suspension. The methods should apply equally well to any negatively charged particulate matter. Design for optimal clay removal efficiency and operating cost efficiency has been based upon previous theoretical results and upon modification of the combination filter-el ectrophores is model of Bier. These systems and techniques along with the theoretical developments leading to their design are discussed. Results and conclusions are given for tests that have been concluded concerning the feasibility or practicality of these electrophoretic clarification systems for commercial use. These are viewed in light of various limiting factors such as electrical conductivity of the medium, quality of water desired, colloid concentrations and electrophoretic mobility of the suspended materials.     

RIDGE REGRESSION TECHNIQUES APPLIED TO LANDSAT INVESTIGATION OF WATER QUALITY IN LAKE OKEECHOBEE1

ABSTRACT: Landsat radiance values were processed at two different (single and double) levels of accuracy to estimate chlorophyll a, turbidity, and suspended sediment in Lake Okeechobee, Florida. Both ordinary least square and ridge regression analyses were used to establish a relationship between water quality parameters and Landsat radiance. Radiance measurements made at greater precision (double level) gave a better solution in this application. The ridge regression analysis for double level not only can reduce the total mean square error about 13–20 percent and confidence interval about 6–28 percent as compared to ordinary least square analysis, but it can also change the interpretation of analysis results.     

Time series in M dimensions: The one-dimensional case: Pollution in the Chicago Sanitary and Ship Canal

A nonstationary time-series model is used to examine the changes occurring at sampling stations on the Chicago Sanitary and Ship Canal. Using data from upstream sampling sites, downstream levels of dissolved oxygen, total dissolved solids, nitrates and nitrites, and ammonia are accurately predicted. The method is simple, insensitive to extreme values, and responsive to changes in the system.     

THE SUSPENDED SEDIMENT REGIME OF AN OREGON COAST RANGE STREAM1

ABSTRACT: Armored stream segments may affect the suspended sediment regime of small mountain streams in western Oregon by the release of fine sediments stored in the bed gravels. Sieve analysis of bed materials indicated that at least 30 percent of the suspended sediment yield for the 1975–76 winter had been stored in the streambed. Suspended sediment concentrations during storm-generated runoff were influenced by stream discharge and hydrograph characteristics. Sediment-discharge relations for individual storms were characterized by hysteresis loops. A seasonal flushing of fines was shown by a progressive decrease in the ratio of suspended sediment to stream discharge during the winter runoff period.     

ESTIMATING THE SUSPENDED SEDIMENT LOAD IN RESERVOIRS1

ABSTRACT: The total suspended sediment loads of four north Mississippi reservoirs were determined from measurements of concentrations of suspended sediment in a vertical profile at several locations on each reservoir made during the year. These data were combined with the stage-height and known stage-volume relationships for each reservoir in a numerical integration to determine the total suspended sediment in the water body. Total suspended sediments were estimated using the product of the suspended sediment concentration in the surface water by the appropriate reservoir volume. The averaged ratios of the estimated to measured suspended sediment loads for each reservoir exceeded 0.90. Since the concentration of suspended sediments in surface waters of north Mississippi reservoirs has been shown as highly correlated with spectral reflectance, estimating the total suspended sediment of these reservoirs using remotely sensed spectral reflectance data is possible.     

ANALYSIS OF WIND- AND SHIP-INDUCED SEDIMENT RESUSPENSION IN DULUTH-SUPERIOR HARBOR1

ABSTRACT: Suspended solids and ammonium concentration profiles measured at five locations in Duluth-Superior Harbor during July-October 1985 were analyzed to quantify wind and ship effects on sediment resuspension and resulting harbor water quality. Wind components from the SE quadrant correlated strongly with depth-averaged suspended solids concentrations that were unaffected by ship passage or thermal stratification. Winds from that quadrant have the largest fetch in the harbor. The highest correlation (r²= 0.93) was with the 6-hour average of the ESE wind velocity component. Multiple linear regression analysis of data from post-ship passage concentration profiles yielded numerical estimates of settling velocities of 0.08 to 0.25 cm s^?1, typical of ship-resuspended sediments, and vertical eddy diffusivities of 4 to 13 cm² s¹. The results suggest that ambient vertical eddy diffusivities in the harbor are less than 4 cm² s^?1 in the absence of ship passages and with winds less than 5 m s^?1 (10 knots).     

我国化学工业的“三废”及其资源化

文章在介绍我国化学工业排放三废的严峻现状后,阐述了通过工艺改造和综合回收途径来推进三废资源化的技术对策,以及从宏观和微观上看深化三废资源化的意义和光明前景。